I messed up soldering these two pins, could someone tell me what these do?

I messed up soldering these two pins, could someone tell me what these do?#50381

By Fantastika - Mon May 17, 2021 11:48 am

- Mon May 17, 2021 11:48 am #50381

Im a bit of an idiot and soldered the wrong thing here and had to remove it, didnt work out very well.

Re: I messed up soldering these two pins, could someone tell me what these do?#50382

By dazq - Mon May 17, 2021 12:31 pm

- Mon May 17, 2021 12:31 pm #50382

Looking at my v04 those pins are not used, check against the schematic diagram for the board will confirm if they are in use.

Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working

Re: I messed up soldering these two pins, could someone tell me what these do?#50384

By theonewithin - Mon May 17, 2021 1:49 pm

- Mon May 17, 2021 1:49 pm #50384

Your other soldering isn't great either.

On through hole you need to apply enough heat before applying the solder so that it flows through to the other side.

The resistors shown in your pic show little sign of doing this correctly.

Slow down a bit. Apply heat. Wait. Wait. Wait. Apply solder.

Re: I messed up soldering these two pins, could someone tell me what these do?#50385

By Fantastika - Mon May 17, 2021 3:44 pm

- Mon May 17, 2021 3:44 pm #50385

theonewithin wrote: ↑Mon May 17, 2021 1:49 pm Your other soldering isn't great either.

On through hole you need to apply enough heat before applying the solder so that it flows through to the other side.

The resistors shown in your pic show little sign of doing this correctly.

Slow down a bit. Apply heat. Wait. Wait. Wait. Apply solder.

im well aware of that my soldering isnt that good, this was the first large soldering project ive done

Re: I messed up soldering these two pins, could someone tell me what these do?#50388

By LPG2CV - Mon May 17, 2021 6:49 pm

- Mon May 17, 2021 6:49 pm #50388

That much soldering scared the shit out of me, so bought one. Well done you.

Mere Mortal