- Mon Mar 01, 2021 9:32 pm
#48701
As above.
Not going to be a firmware bug.
Will most likely be a hardware issue (wiring, sensor or faulty Speeduino/Arduino).
One other possibility is corrupted firmware.
You could do an eeprom clear and reload firmware then base tune then re-enter all your settings.
Not going to be a firmware bug.
Will most likely be a hardware issue (wiring, sensor or faulty Speeduino/Arduino).
One other possibility is corrupted firmware.
You could do an eeprom clear and reload firmware then base tune then re-enter all your settings.