- Fri Aug 26, 2022 1:24 am
#58340
The static timing is good, the locating of the trigger wheel and sensor was a tad difficult. It's very close now. As it stand it's starts up well but it'll die without my foot on the pedal. 02 Sensor says the fuel ratio lean ( 10+ to 1) but the plugs looked awful ( likely from the carb that was on previously) so I put in new ones. Still awfully rich smelling for showing so lean but starting up when it should is progress. These injectors are probably too big for Na now that I think of it.
I have to pull a USB to power cycle because the Raspberry Pi screen sends voltage to the speedyefi. Looking for settings to change that in the future.
I have to pull a USB to power cycle because the Raspberry Pi screen sends voltage to the speedyefi. Looking for settings to change that in the future.