Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By TonySandberg
Thought it was a good way to use the inputs / outputs if you do not use 4p IAC. Even if it is not possible to use the Arduino IAC pin 16,17, it is a good and smooth placement with 4 inputs 5 & 12v and gnd.
1599857164584.jpg (41.65 KiB) Viewed 263 times
IMG_20200911_203051.jpg (1.24 MiB) Viewed 263 times
1599850190772.jpg (28.32 KiB) Viewed 263 times

Hi flat4power, B72530V1140S262: Unfortunately JLC[…]

2CV 602 flat twin

Dasq : So you say that the base table will allow […]

Fuel Injected Two Stroke

Rob Great feedback! Thanks. Seems like my lower […]

Okay I have ordered throttle body with injectors a[…]

Still can't find what you're looking for?