Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
So after playing around with ignition settings I changed "wasted spark" to "wasted spark cop" and now it starts right up and is firing on all cylinders.

The problem is i am still using stock coil packs not a COP setup. I tested each cylinder with an induction tester and every cylinder is firing.

Would it be a problem running it this way? Could it be that the previous owner of the speedy built the speedy for COPs?
Toyota 1MZ-FE PNP

The car is running! 20201124_161006_720.jpg

Coils getting hot

okay so i did some back tracking and found out tha[…]

If you have primary on the crank, why change it?

Hi, it was this thread, 'https://speeduino.com/for[…]

Still can't find what you're looking for?