Any questions you have before you begin buying, building and installing.
By master_pgl
there is an other issue on my setup.
When TunerStudio is loading the msq file there apears a warning, but i cant find the setting for this. The message is: MSQ unit mismatch for load binswt! kPa found in current configuration, % TPS found in MSQ...

The MSQ unit is the right one, but where is the other?
proyect ford zetec-e 2.0 16v

Wow! Awesome. Thank you

I have moved my design files to the more logical p[…]

If you have max coil primary voltage at 400V : -[…]

Problems loosing sync

normally it should be ok, but the output from anot[…]

Still can't find what you're looking for?