Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By joey120373
#44547
Birdickjp, it is pin compatible with the micro-squirt module, so it should plug in just fine.
However it is pretty much completely untested at this point.

I would like to at least test it on an engine before I release anything. Drop me a PM if you are really interested, I can send a spare PCB If you want to play with one.
Kawasaki Concours 2.0

Got another Kawasaki Concours that is ready for EF[…]

proyect ford zetec-e 2.0 16v

That all seems perfectly normal for an untuned e[…]

@PSIG David, I was wondering if Peak and Hold may […]

does not start

yes, as @jonbill suggests, use 20208 firmware. Th[…]

Still can't find what you're looking for?