For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By joey120373
#44547
Birdickjp, it is pin compatible with the micro-squirt module, so it should plug in just fine.
However it is pretty much completely untested at this point.

I would like to at least test it on an engine before I release anything. Drop me a PM if you are really interested, I can send a spare PCB If you want to play with one.
proyect ford zetec-e 2.0 16v

Wow! Awesome. Thank you

I have moved my design files to the more logical p[…]

If you have max coil primary voltage at 400V : -[…]

Problems loosing sync

normally it should be ok, but the output from anot[…]

Still can't find what you're looking for?