New wiki and manual has launched! Check it out at
Any questions you have before you begin buying, building and installing.
By noisymime
Post your tune up, I'd be extremely surprised if there's anything in the firmware that is specifically blocking that pin though. Have you confirmed it works with a previous firmware version?
By NickZ
what your saying sound right if you have pin 38 assigned in your tune somewhere to something else, ive had the same problem too when i selected a ignition pin as a fan output by accident.
if it was a firmware problem it wouldn't matter what board it was, if pin 38 is assigned as i ignition output most boards would have a problem on the new firmware.

Maybe the TEST function isn't working for that pin.
User avatar
By zoidberg
i doubt its the test not working or having todo anything with configuration in tuner studio, as it works now. I remapped the pin to another and removed the pin and bridged it and now it works.
I can take a photo later and upload it.
Ignition timing LED light

Forgot to add that the speedy is only powered by t[…]

Another Honda Build :P

Good day to every one As far as progress none so[…]

I think the main challenge here will be controllin[…]

R1 Thunderace trigger

Apologies for raising this old thread, but those a[…]

Still can't find what you're looking for?