[SimBa]

Just curious where that trigger pattern code exists. I've been doing some testing/debug around the 36-2 Wheel. I've got my car running and maintaining fully sync, supposedly with sequential fuel. I'm searching for an issue that is causing a misfire around 4000 RPM and causing me to idle extremely rich. It seems that the longer I idle, the more I start getting misfires which cause lean spikes.

My understanding is that the cam signal is not referenced after startup, but I'm wondering if that's really the case. I've been discussing with someone else who recently went to a 36-2 wheel and is having a similar misfire, but is running batch injection.

It could be unrelated, but I was curious to see if adding the cam trigger pattern would fix these issues before throwing parts at the ignition system.

[czarobest]

Jonbill & m11nch are aware but for anyone else reading this, sooner code had been written and it's waiting for testing. Hopefully in the new year this will be proven and then added to a release in 2024.

Hi, has anything happened on this? I'm also looking forward to such a feature, as I drive in semi-sequence mode, but it would be nice to use the full injection and ignition sequence and be able to control the VVT in closed loop .