For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
#68002
Hi, I have a problem with ecu and I cant seem to find the fault. Car runs fine and with no issues part throttle.
When I open throttle 100% it starts to act weird. it feels like ecu protection is kicking in but checking the logs (ill add a file here) ecu prot isn't doing anything. Its jumping to 17afr for like 300ms and then going back to normal. VE table is smooth and plenty of fuel. walbro 255lph pump with 875cc injectors on m52b25 engine. I think this ecu is broken or some sensor is about to die.
Ill add the whole tune file also, maybe somebody can spot the problem :roll:
It seems that the injector duty cycle jumps to 0 at random moments. How can it be ?

thank you.
Attachments
(90.35 KiB) Downloaded 15 times
(829.97 KiB) Downloaded 12 times
#68004
I think your problem is the deceleration enleanment setting.
0 means total fuel cut off on when TPS falls. 90 is the default I think.
I'm looking at 101.715s in the log.
Screenshot 2024-04-17 at 08.52.00.png
Screenshot 2024-04-17 at 08.52.00.png (945 KiB) Viewed 693 times
Screenshot 2024-04-17 at 08.48.46.png
Screenshot 2024-04-17 at 08.48.46.png (335.4 KiB) Viewed 693 times
BMW E23 M30B28

Ignore my previous posts, I'm an idiot. Turns out […]

He's quite prolific with respect to video and elec[…]

I’m thinking it’s the voltage regulato[…]

HAHA Thank you! Ok got it the outer part of the […]

Still can't find what you're looking for?