For any other general hardware. Can be OEM parts (Eg Coils, injectors etc) or anything more specific.
#67894
Hello
Seeing as it is impossible for me to find information about my ignition coil and my injector.
I am writing this to ask you, if you can, to help me find some ignition coils and a valid injector for my car, or I would also appreciate if you know information about my coils and injector, or a website where I can find that information, give it to me. to be able to have that information to fill out the studio tuner.

My car is:
Opel astra g year 1999 european version
Engine type:
X16szr
1.6 8V 75 hp
TBI single point injection

Thank you so much
#67895
I give you photos of the components that I want to change due to lack of information or to obtain information about these components of my car.
Thank you
Attachments
Screenshot_2024-04-11-11-52-51-423_com.android.chrome.jpg
Screenshot_2024-04-11-11-52-51-423_com.android.chrome.jpg (541.46 KiB) Viewed 1107 times
Screenshot_2024-04-11-11-51-05-297_com.android.chrome.jpg
Screenshot_2024-04-11-11-51-05-297_com.android.chrome.jpg (528.35 KiB) Viewed 1108 times
Screenshot_2024-04-11-11-51-00-218_com.android.chrome.jpg
Screenshot_2024-04-11-11-51-00-218_com.android.chrome.jpg (512.14 KiB) Viewed 1108 times
Screenshot_2024-04-11-11-34-30-046_com.android.chrome.jpg
Screenshot_2024-04-11-11-34-30-046_com.android.chrome.jpg (366.97 KiB) Viewed 1108 times
IMG_20240411_113609.jpg
IMG_20240411_113609.jpg (156.21 KiB) Viewed 1108 times
#67905
I do not have info for Euro cars. However, that is a Rochester fuel injector, used by GM both TBI and multi-port (MPFI) in the late '90s-early '00s. Part numbers are typically 7-digit. Some American V8 engines used them, so perhaps there are larger versions used in TBI for those?

For size, you can use any online injector size calculator (such as down this page), or your own calculator.

I also can't say about the coil, but if you can find wiring diagrams from a car it was used in, you can test for good dwell values once it's in the car, or estimate with a calculator. Sorry I'm not of much help.
#67909
thanks for answering,
Regarding the coil, I have the workshop book or repair book as well as the autodata, where the coil diagrams are good, but unfortunately I don't know how to read the electrical diagrams very well, much less get something useful.
Anyway, I'll post a photo here of the schematic in case it could be of any use.
In any case, do you know of any brand of competition or normal coils that could be used for my car (we are talking about coils that, apart from being useful for my car, we have the data we need to have a tuning study, otherwise it would be useless, hehehe).
Regarding the injectors, do you know of any website that has that injector and its technical data? I ask this because I was searching on that same website for my injector model in case "I'm lucky" and the data is there or I find an injector that would work for my car but that has the technical data.
thank you
Attachments
(5 MiB) Downloaded 8 times

What is in the stock ECU? some of them don't use a[…]

Jeep transmission compatibility

Wanting to replace the old crappy Chrysler PCM in […]

blitzbox

Hi, It seems I can’t blame the error with t[…]

Thank you all for your input. I have managed to g[…]

Still can't find what you're looking for?