Randoom wrote:Hey guys, if i am using the stock sensor on the m20b20 should i use the "Cam Sensor Power" jumper on the back of the board ? If so, should i set it to 5 or 12v ?no add a jumper between 2 and 3 on SJ1 and leave rest. you need max9926 vr conditioner board
- By digmorepaka
Can you take a picture of your trigger wheel and a[…]
- By PSIG
Ha! I see you answered your own questions 8-), an[…]
- By PSIG
If the TCM requires no reference from the ECM, t[…]
Still can't find what you're looking for?
