- Sat Dec 16, 2023 1:55 pm
#66283
Hello fellows. Any chance to get an ethanol percentage hold feature on flex fuel when at high loads? Say lock in the last low load reading when throttle goes over a certain percentage, maybe half or 3/4 throttle? A feature such as this is a thing on some other platforms and can really be considered a safety feature. On very high boost drag racing setups the engine can be destroyed very quickly if for some reason the ethanol reading drops from 80-90 percent down to 0-10 percent while on a pass at the track at boost levels that can be well over 30 psi. This can happen due to sensor being on return line and marginal supply volume, noise in wiring or sensor failure. Of course moving sensor to supply side or more supply volume and trying to eliminate any noise can help first two potential issues but the sensor can also suddenly fail during a pass as well. This simple added feature could save someone an engine in that event.
Thanks!
Thanks!