[Gronno]

Hi all, hoping someone can help me. I made one of the stupidest mistakes I have made while working on cars today, while wiring the loom I have somehow made the mistake of wiring the 12v and gnd the wrong way round (I know what a clown). When plugging in in the ecu with the wrong polarity I immediately saw some smoke from around the 40pin connector and disconnected, after realizing my mistake I switched the polarity and plugged it in and this cause the c17 capacitor to go pop. I am using the Speeduino v0.4.4c, does anyone know what capacitor is in c17 or anything else I could have damaged?