KiwiNeil wrote: ↑Sun Oct 09, 2022 2:12 am I've been building and testing this ecu over the last year, it is Teensy based using the same pin configuration as the Dropbear to make it 100% compatible with the Dropbear firmware configuration.Do you find Dropbear schematics? Or you can share the schematic of the MC33810 and Crank/Cam filter circuit. I'm planing on made board with the MicroMod Teensy board from Sparkfun https://www.sparkfun.com/products/16402
KiwiNeil wrote: ↑Sat Apr 29, 2023 10:06 am This Video by Josh has the parts of the schematic you are looking for. At about 1 hour in.Thanks, I watch the video along time ago and forgot the schematics are on the video.
“Speeduino live - New hardware time”
https://www.youtube.com/live/U8xHUzl9p08?feature=share
- By ruckusman
Hi there, I'm doing preliminary research and hope[…]
- By Logicaluk
Once again PSIG, thank you. Note this is set up fo[…]
Still can't find what you're looking for?
- By jonbill