For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
By edc_atl
#5372
If you are having problems locating a part that you need for your Speeduino board, or any other plug in board available here, chances are we have good quantities of them in stock.

If you can't find locally or at your favorite parts store in your area, email us at support@edcatl.com with your part number.
User avatar
By PSIG
#17200
I'll let noisymime or others chime-in here, but I believe it only adds one 220-ohm 1/4W resistor for the Flex Fuel sensor input, over the v0.4.2 BOM file in your Speeduino download. You should add a ULN2803A to your BOM if you plan to use the low-current outputs.

David

I uploaded logs and last tune and dyno plots look[…]

you could set 'skip revolutions' to 3, then it wou[…]

Hi, I am trying to assign Signed values to the x-a[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Still can't find what you're looking for?