Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By theonewithin
#48701
As above.

Not going to be a firmware bug.

Will most likely be a hardware issue (wiring, sensor or faulty Speeduino/Arduino).

One other possibility is corrupted firmware.

You could do an eeprom clear and reload firmware then base tune then re-enter all your settings.
By Marius222
#48716
Today I checked the wiring and tested the sensor, everything is fine.
How do I reload the firmware?
I tried speedyloader ant installed downgrade and no luck for me
By theonewithin
#48737
Once again as above.

You need to find and fix your actual problem.

Do you have a spare Arduino you can test?

Or some random resistors you can put in place of your sensor to see the result?
Boost By Gear

well good to know , I haven't seen it on github or[…]

what I can't understand is what you mean by &quo[…]

In a general sense, the reliability of things like[…]

As far as I know all NA 1.8's are sequential. Does[…]

Still can't find what you're looking for?