- Sun Feb 28, 2021 7:06 pm
#48668
Hey, i'm new in this forum and i have a bit trouble with wiring ignition system on Peugeot 406 2.0 Turbo. I'm wiring Speeduino as a piggyback ECU in parallel connection with OEM ECU. The red wire from ignition coil connector goes to ECU and ECU relay. Two blue wires from connector goes on ignition amplifier. I know it's wasted spark system, so how should i wire ignition with speeduino? I think i should leave red wire that goes from coil connector to ECU relay and i probably need to remove ignition amplifier and connect ignition 1 and ignition 2 wires from speeduino on that two blue wires from coil connector. Can somebidy help me please?
Attachments
Relay on ECU.jpg (933.91 KiB) Viewed 4458 times
Ignition Coil.jpg (199.96 KiB) Viewed 4458 times
Ignition Coil Diagram.jpg (278.03 KiB) Viewed 4458 times
Ignition coil connector.jpg (76.62 KiB) Viewed 4458 times
Ignition Amplifier.jpg (214.31 KiB) Viewed 4458 times