Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
By Lance.custompaint
So I have my subaru all set up with a speedy efi ecu and I have been slowly getting it all sorted out but im having an issue with hard starting, it is difficult cranking and back fires once in a while. My first instinct is the cranking timing is off. I have changed it multiple degrees both ways and no change. It is currently set at 5 degrees. Seems to run decent once it starts.
By theonewithin
You need to post your tune and a log during issue for us to see what is happening.

Without we are completely blind as to what is going on.

Don´t ever expect identical connectors to ha[…]

Kawasaki Concours 2.0

Been a bum of the last two weeks. Had to have a co[…]

The recommended procedure to adjust idle for some […]

2nd clio williams build PROBLEMS!

So that solves one part of the puzzle if the shiel[…]

Still can't find what you're looking for?