- Mon Oct 26, 2020 2:09 pm
#46058
Will try existing cam semsor from ducati its bosch 3 wire pin with pull up resistor. Will use also dumb coil. Now am getting loss sync if using custom vr sensor if i out in sparkplug. Anyway will update in few days
LAV1000 wrote: ↑Mon Oct 26, 2020 6:00 am Mine isn't running yet but test seems to be ok, also an NO2C.Try mounted vr sensor from small bike
OEM sensor on mine is 3 wire VR sensor, 2 wires are sensor 3th screen.
Can you post a picture of your sensor ?
In tuner studio you can set your toothed wheel to cam speed.
Crank turns 2 times faster then cam, ever 720 (2x360) crank gives a 360 cam rotation.
What type of ignition coils are you using ?
And how did you wire them ?
Are you getting sync losses ?
What happens if you keep spark plugs in but don't fire them.
To check if it is only compression or the spark which causes trouble.
Wil share settings but have to look them up and check.
Where in the world are you located ?
Will try existing cam semsor from ducati its bosch 3 wire pin with pull up resistor. Will use also dumb coil. Now am getting loss sync if using custom vr sensor if i out in sparkplug. Anyway will update in few days