LPG2CV wrote: ↑
Tue Oct 20, 2020 6:48 pm
What board, and what have got connected to what?
first of all thanks for your help.
-the board is a v0.4.3c
-A positive current has been connected to position 1 of the relay actuator, position 2 of the relay actuator to speeduino pin 37 (it has been set in the accessories tab of arduino pin5).
- 3.3v current was connected to another connector of the relay and its corresponding output to a led, and from this to the negative of the source.
attached a video:
https://drive.google.com/file/d/1C6ePPy ... p=drivesdk
thank you very much again