Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
By tinchoC
Very good to all, I am running a speeduino v0.4.3c board, it runs without problems but every so often the computer restarts I think the reason is not having the reset control configured well, I cannot find any tutorial on how to configure it, if someone can me explain how to do it I would appreciate it.

Coils getting hot

so i have a speeduino installed on my Toyota 4age […]

Hi, it was this thread, 'https://speeduino.com/for[…]

Trigger on Pick-up/Ignition

Hi, I`ve bought the Speeduino v0.4.3c with condit[…]

3 cylinder 2 stroke controller

So looking at my need for water pump and fan contr[…]

Still can't find what you're looking for?