Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
By tinchoC
Very good to all, I am running a speeduino v0.4.3c board, it runs without problems but every so often the computer restarts I think the reason is not having the reset control configured well, I cannot find any tutorial on how to configure it, if someone can me explain how to do it I would appreciate it.


Hi Fellows, Small adjustments into the final desi[…]

Take a look at this: https://speeduino.com/forum/[…]

There is information on driving high voltage injec[…]

Ok, I got the car back together and have been test[…]

Still can't find what you're looking for?