Help with building your Speeduino, installing it, getting it to run etc.
#44489
So after playing around with ignition settings I changed "wasted spark" to "wasted spark cop" and now it starts right up and is firing on all cylinders.

The problem is i am still using stock coil packs not a COP setup. I tested each cylinder with an induction tester and every cylinder is firing.

Would it be a problem running it this way? Could it be that the previous owner of the speedy built the speedy for COPs?

I think the holes for the studs are M6. I will sea[…]

Thanks for the confirmation of the board option! […]

My approach in this situation is to determine if[…]

Can't find Schottky Diode

Hello, I want to build a V0.3 board. I found all t[…]

Still can't find what you're looking for?