Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By joey120373
#44547
Birdickjp, it is pin compatible with the micro-squirt module, so it should plug in just fine.
However it is pretty much completely untested at this point.

I would like to at least test it on an engine before I release anything. Drop me a PM if you are really interested, I can send a spare PCB If you want to play with one.
M43 turbo

Having same issue like this on a m20 and m40. Tr[…]

Hi, MP2451 could be a replacement and is also a ba[…]

Idle Up Delay

Idle up is an input not an output? Also you can u[…]

Anomaly lamp

You can setup a programmable output to do anything[…]

Still can't find what you're looking for?