Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By joey120373
#44547
Birdickjp, it is pin compatible with the micro-squirt module, so it should plug in just fine.
However it is pretty much completely untested at this point.

I would like to at least test it on an engine before I release anything. Drop me a PM if you are really interested, I can send a spare PCB If you want to play with one.
76 Triumph TR6 to TBI

I've been trying to decide where to put the O2 s[…]

Modified 3 cylinder

I know it will not be balanced quite right. The t[…]

Which hall sensor are you using ? Looks like it is[…]

Rover 36-1-1-1-1 wheel

So i've started to have a go at the coding. Just t[…]

Still can't find what you're looking for?