- Tue Jul 14, 2020 6:01 am
#44236
Hi
I need again some help.
I would like to connect the cam senso via VR conditioner, but I have no idea if its a hall or iductive sensor.
The Type is Bosch 0232 103 022 with 3 pins. It is magnetic so it could be inductive, but all inductive sensors I know are connected by 2 pins.
I measured also the resistance between all pins, its huge ->infinite. This would mean its a hall.
I need again some help.
I would like to connect the cam senso via VR conditioner, but I have no idea if its a hall or iductive sensor.
The Type is Bosch 0232 103 022 with 3 pins. It is magnetic so it could be inductive, but all inductive sensors I know are connected by 2 pins.
I measured also the resistance between all pins, its huge ->infinite. This would mean its a hall.