Help with building your Speeduino, installing it, getting it to run etc.
Yes, it is quite common for many countries to restrict importation to individuals (or extremely high costs, hassle or taxes), so solutions for using available components becomes necessary.
The STP FET doesn't have any protection - thats just marketing BS, it has a gate clamp which is intended to increase the effective avalanche rating, it has no over-current or over-temperature protection. You can use any conventional FET with an adequate avalanche rating but it should be at least 50V rated to avoid issues during load dump conditions. I would choose a FET with the same voltage rating as the stock ECU to minimise turn off times.
proyect ford zetec-e 2.0 16v

Wow! Awesome. Thank you

I have moved my design files to the more logical p[…]

If you have max coil primary voltage at 400V : -[…]

Problems loosing sync

normally it should be ok, but the output from anot[…]

Still can't find what you're looking for?