Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
By Paul
Hello, My tps has 2 sensors on it one 3 pin and a switch to activate it. I've tried hooking up only the 3 pin to my Speeduino without any readings. I also tried feeding the switch 5v to try to get something out of the tps. I tried reversing the polarity and still nothing. Do you guys have any ideas on what I could try to get this thing to work? The engine is in a Nissan 240sx with a wiring specialties harness.
By Paul
Here are some pictures
IMG_20200627_171823.jpg (4.93 MiB) Viewed 564 times
IMG_20200627_171648.jpg (5.04 MiB) Viewed 564 times
IMG_20200627_171619.jpg (4.59 MiB) Viewed 564 times

Or should this question be asked in: DECODERS - WH[…]

Idle Up Delay

I would like to introduce a delay between idle u[…]

Anomaly lamp

I think what the op means is a cel or "check[…]

M43 turbo

Having same issue like this on a m20 and m40. Tr[…]

Still can't find what you're looking for?