[JochemsTR]

UA4C comes with 2 plugs and 46 crimps.
Where can I buy these plugs and crimps, or what is the naming of this type of plugs and crimps.
Jochem

[JochemsTR]

if I am correct, they seem to be molex micro-fit 3.0

[turboedge]

Hi Jochem,

I usually send 50 of the crimps just in case, and usually most people aren't going to use all the connections anyways, so that gives you some more spares. If you do need another set though I sell them on my site here: https://wtmtronics.com/product/ua4c-harness-plugs/

Thanks, Weaver

[JochemsTR]

Hi Weaver, I appreciate it! Thank you.
Jochem

[turboedge]

They are very similar to the standard 3mm/Micro-Fit. However they are sized slightly different and have a higher current rating. They will not mate with standard 3mm/Micro-Fit connectors unless you solder different plugs to the board.

Thanks, Weaver

PS- You're Welcome!

[JochemsTR]

I guess one order coming your way....shipping to germany.

[JochemsTR]

what is the current rating?
Wiring is 20-24....can I also use 18 gauge?
Jochem

[turboedge]

Up to 12 amps which seems a bit optimistic for something so small. You can use up to 16 gauge wire, but the insulation has to be really thin to still fit into the housing.

Thanks, Weaver