- Tue Dec 08, 2015 1:19 am
#3983
I have a few old v0.2 boards plus the bad v0.3.2 boards that arrived going begging if anyone wants them.
The v0.2 was a bit of a limited version of the v0.3 and had some ideas that turned out to be non-starters, but the boards may be useful if you know what you're doing.
The 'bad' v0.3.2 boards were the ones that I stuffed up and incorrectly placed a copper fill on that didn't connect the grounds. Technically these can be made to work if you're willing to solder up each ground point to the copper fill, but it's a non-trivial amount of work. I stress that these boards will no function correctly as is.
Free to anyone who who wants to pay postage on them.
The v0.2 was a bit of a limited version of the v0.3 and had some ideas that turned out to be non-starters, but the boards may be useful if you know what you're doing.
The 'bad' v0.3.2 boards were the ones that I stuffed up and incorrectly placed a copper fill on that didn't connect the grounds. Technically these can be made to work if you're willing to solder up each ground point to the copper fill, but it's a non-trivial amount of work. I stress that these boards will no function correctly as is.
Free to anyone who who wants to pay postage on them.