- Mon Apr 06, 2020 3:39 am
#41873
David
Stroker wrote: ↑Sun Mar 29, 2020 8:24 pm I have the Black TFI module so not sure how they differ?Some about the CCD "black" modules here. Yes, any digital input into Speeduino above 5V needs signal conditioning (such as a diode), as shown here. Anywhere between the signal source and the input, or even on the Speeduino board inline in the input circuit.
Do I still need a reverse diode? If so, how do I wire it in?
David
-= If it was easy, everyone would do it =-