Firmware live stream happening this weekend: viewtopic.php?f=13&p=43195
Any questions you have before you begin buying, building and installing.
By noisymime
#41471
Post your tune up, I'd be extremely surprised if there's anything in the firmware that is specifically blocking that pin though. Have you confirmed it works with a previous firmware version?
By NickZ
#41494
what your saying sound right if you have pin 38 assigned in your tune somewhere to something else, ive had the same problem too when i selected a ignition pin as a fan output by accident.
if it was a firmware problem it wouldn't matter what board it was, if pin 38 is assigned as i ignition output most boards would have a problem on the new firmware.

Maybe the TEST function isn't working for that pin.
User avatar
By zoidberg
#41719
i doubt its the test not working or having todo anything with configuration in tuner studio, as it works now. I remapped the pin to another and removed the pin and bridged it and now it works.
I can take a photo later and upload it.
E190 2.3 8V FUEL ONLY

I think there is a reason why OEM bosch costs 70$ […]

May 2020 firmware release

I could try the 680 ohm, but the onboard pullup […]

NA VVT Swap No Start

I guess still no start. Your logger looks good exc[…]

past my bedtime! I'll watch it on catchup.

Still can't find what you're looking for?