Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
#40928
For sale in mint condition a diy-efi core 4 board with a Miata NA pnp daughterboard (fits inside original case). AFM delete harness plus Bosch IAT. Vacuum line, vacuum T, 14point7 on board controller and BOSCH LSU 4.9 WB sensor. Also KIA TPS kit with three 3d printed adaptors. USB cable for connection to laptop and also serial bluetooth module. 350 Euro plus p&p.
Turbo project died due to cash shortage.
Attachments
IMG_20200213_183737.jpg
IMG_20200213_183737.jpg (927.66 KiB) Viewed 7796 times
IMG_20200213_183728.jpg
IMG_20200213_183728.jpg (920.71 KiB) Viewed 7797 times
Kawasaki Concours 2.0

Got another Kawasaki Concours that is ready for EF[…]

proyect ford zetec-e 2.0 16v

That all seems perfectly normal for an untuned e[…]

@PSIG David, I was wondering if Peak and Hold may […]

does not start

yes, as @jonbill suggests, use 20208 firmware. Th[…]

Still can't find what you're looking for?