Firmware live stream happening this weekend: viewtopic.php?f=13&p=43195
Any questions you have before you begin buying, building and installing.
By noisymime
Post your tune up, I'd be extremely surprised if there's anything in the firmware that is specifically blocking that pin though. Have you confirmed it works with a previous firmware version?
By NickZ
what your saying sound right if you have pin 38 assigned in your tune somewhere to something else, ive had the same problem too when i selected a ignition pin as a fan output by accident.
if it was a firmware problem it wouldn't matter what board it was, if pin 38 is assigned as i ignition output most boards would have a problem on the new firmware.

Maybe the TEST function isn't working for that pin.
User avatar
By zoidberg
i doubt its the test not working or having todo anything with configuration in tuner studio, as it works now. I remapped the pin to another and removed the pin and bridged it and now it works.
I can take a photo later and upload it.
NA VVT Swap No Start

Relevant manual page:[…]

E190 2.3 8V FUEL ONLY

I think there is a reason why OEM bosch costs 70$ […]

May 2020 firmware release

I could try the 680 ohm, but the onboard pullup […]

past my bedtime! I'll watch it on catchup.

Still can't find what you're looking for?