LPG2CV wrote: ↑Fri Mar 13, 2020 9:44 am
If there was a bug that stopped ign channel 2 from working, then everyone would have it!
Yes i mean everyone using 0.4 with the latest firmware.
I loaded the basetune but that shouldn't matter. I have an arduino mega:
https://www.amazon.de/gp/product/B00D9N ... UTF8&psc=1
I flashed the latest firmware and connected a LED to pin 38 directly (with a resistor to gnd not to kill the LED).
Then I connected it to tuner studio selecting the 0.4 board.
Then i used hardware testing to set the output on pin 38 to high which doesnt work.
works for all other pins.
When poweriung the arduino pin 38 flashes a few times. That tells me that there is something happening with that pin, maybe there is a register shifted so that this pin goes high and then low and cannot be used later because of that. Who knows. I will have time to bisect that this weekend.