- Thu Feb 20, 2020 8:18 pm
#41044
HI im really interested in getting started with this
Im a Mechannical Engineer by trade
but have done ignition tuning before on a NODIZ pro on a Renault 5 gt turbo ( addition of trigger wheel to crank and a ford wasted spark coil pack)
My new projects are Fiat 127 (705cc twin cylinder ) which i want to turbo
so would be looking to either do a blow through on the carb and use the speeduino for the ignition , or go full bore and install a throttle body with injector and control an injector or 2 and ignition timing for the small turbo
After this i want to be using it for a CBR1000 Bike engine on carbs - so again it will be either a blow through set up with the ecu controlling ignition vs boost or full injection vs ignition .
Which kit would be suitable to do this
im fairly well up to speed with tuner studio
just not sure which hardware i should be using
thanks in advance
Im a Mechannical Engineer by trade
but have done ignition tuning before on a NODIZ pro on a Renault 5 gt turbo ( addition of trigger wheel to crank and a ford wasted spark coil pack)
My new projects are Fiat 127 (705cc twin cylinder ) which i want to turbo
so would be looking to either do a blow through on the carb and use the speeduino for the ignition , or go full bore and install a throttle body with injector and control an injector or 2 and ignition timing for the small turbo
After this i want to be using it for a CBR1000 Bike engine on carbs - so again it will be either a blow through set up with the ecu controlling ignition vs boost or full injection vs ignition .
Which kit would be suitable to do this
im fairly well up to speed with tuner studio
just not sure which hardware i should be using
thanks in advance