Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
User avatar
By PSIG
#33000
lost wrote:
Fri Mar 22, 2019 9:11 am
Here is some info how vems that runs atmega does it:
https://vems.hu/vt/help/v3/v3_config_switch.html
Yes, that is config-switching, equivalent to tune-swapping, and not the generic term of table (only)-switching. Big difference, and exactly what I am talking about. :) For this reason, please do not use "table-switching" when you mean config-switching or tune-swapping. Now let's return to the OP's thread, and if you wish to discuss or comment further, please start your own thread or add to a thread already on that specific topic. Thanks!
8-)
David
Sequential timing with map sensor

I explained why i need those features in the begin[…]

Thank you for the help, Chris. I uploaded test co[…]

PCB for BMW m42/m50/m60 engine

;) Have you same information for deka 875cc ? :)

Are you using the correct resistor type spark plug[…]

Still can't find what you're looking for?