- Mon Mar 26, 2018 6:59 pm
#25158
I'm new to the Speeduino family.....well still looking on from the outside to be precise. I'm considering adding a management system to my old Vauxhall 2300cc slant 4 engined Firenza. My car is built using period parts and looks like it could have been built in the 1970's or 80's and I want to keep any modifications as subtle as possible. I've been planning this for a few years so have a good idea of what way I want to proceed and I've gathered together some of the hardware.
I will be using a single throttle body with an alloy plenum style manifold, adapted from an MGF, complete with MAP sensor, a Bosch Hall effect distributor with a Bosch '008' type (Intermotor 150000) ignition amp and matching Bosch coil.
My question is what are the most suitable Speeduino bits I need to buy to make this all work? I will be using the original MG style MAP sensor rather than a board mounted one.
I will be using a single throttle body with an alloy plenum style manifold, adapted from an MGF, complete with MAP sensor, a Bosch Hall effect distributor with a Bosch '008' type (Intermotor 150000) ignition amp and matching Bosch coil.
My question is what are the most suitable Speeduino bits I need to buy to make this all work? I will be using the original MG style MAP sensor rather than a board mounted one.
Attachments
Engine bay.jpg (484.58 KiB) Viewed 10672 times
side.jpg (231.24 KiB) Viewed 10672 times
"When you have a Firenza like mine, who needs any Minis?" copyright David Maxwell 1979