For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
#23201
Hello all.
I am offering Speeduino kits and related accessories from then UK.
I have been selling on eBay for a while and most people seem to end up joining here afterwards.
So I thought I would offer it all for sale here and pass on fee savings.
I am happy to ship to the UK, Europe and beyond.

If you are Australian based please support Josh by buying from the store: Official Store
If you are US based turboedge is probably your man: His Sales Page

------------------------------------------------------- SPEEDUINO --------------------------------------------------------
I have kits and assembled units using the official Speeduino designs, they are unchanged by me.
£9 per PCB blank v0.4.3b - Black w/white.
£3 per PCB blank VR v3 - Black w/white.
£92 for 0.4.3b kit, includes MPX4250AP MAP sensor and PCB.
£92 for a MX5 PnP Beta kit, including all the components, PCB and 48 Pin connector
£150 for an Assembled 0.4.4 unit. This is an SMD version of the 0.4.3.
I have had a batch of these built professionally in China.
£17 Assembled V3 VR Conditioner. Built by myself, if bought with a kit pcb headers are not
soldered to keep postage costs down.
All components are genuine purchased in the UK from mouser, farnell and RS.
Components are packaged separately and labelled with stickers.
--------------------------------------------------------------------------------------------------------------------------------

--------------------------------------------------------- EXTRAS ---------------------------------------------------------
ULN2003 chips can be added to a 0.4.x kit for £1.
Bluetooth modules with a small pigtail can be added for £5
Stepper Idle drivers can be added for £4
MAP sensors included in the kits can be upgraded to 400kpa (MPX4400) for £10.
MEGA 2560 board with firmware pre-loaded, £13.
The correct sized aluminium enclosure for 0.4.x boards can be included for £26.
A Bosch 221 style ignition driver can be included for £25
A 40 pin dupont housing with 40 crimp terminals can be included for £4, ideal for a 0.4.x board.
------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------ SHIPPING ------------------------------------------------------
Buyer pays post and packing costs
PCBs alone can be sent in an envelope pretty cheaply, but there is no tracking or insurance.
Blank PCBs usually ship same day, kits next day, and assembled units within two days.

Normal UK shipping rates:
PCB only (letter): £1 - First class
Component Kits (Large Letter): £3 - First Class Signed For
Assembled units or large orders (Small Parcel): £8 - Special Next Day delivery

International shipping rates on request.
--------------------------------------------------------------------------------------------------------------------------

--------------------- PAYMENT ---------------------
I am happy to accept the following.
PayPal
UK Bank Transfer
Credit/Debit card (via my website)
BITCOIN (contact me)
--------------------------------------------------------
Attachments
IMG_20171210_201251.jpg
IMG_20171210_201251.jpg (1.41 MiB) Viewed 17667 times
IMG_20171210_201059_cut.jpg
IMG_20171210_201059_cut.jpg (1000.76 KiB) Viewed 17667 times
IMG_20171210_200926_cut.jpg
IMG_20171210_200926_cut.jpg (1.04 MiB) Viewed 17667 times
#23485
Hello, I'm after a 0.4.3 pcb + components (i am UK based!) would it be easier to PM you on here with my PayPal address or contact you through your DIY_EFI store? I can't checkout on your store - it says that there are no carriers available for my address.

Thanks very much for putting the kit together :)
#23498
V6vintage wrote: Fri Jan 05, 2018 10:33 pm Hello, I'm after a 0.4.3 pcb + components (i am UK based!) would it be easier to PM you on here with my PayPal address or contact you through your DIY_EFI store? I can't checkout on your store - it says that there are no carriers available for my address.

Thanks very much for putting the kit together :)
Hello.

I am having some issue with the shipping setup on my site, I'm trying to get to the bottom of it.
In the meanwhile if you drop me a PM I can invoice you for the parts you are after.
Thanks
#23499
Experion wrote: Sat Jan 06, 2018 12:32 pm I found your store via Google,
is it possible to add the 400kpa map sensor upgrade to the store?
Hello.

I am having some issue with the shipping setup on my site, I'm trying to get to the bottom of it.
In the meanwhile if you drop me a PM I can invoice you for the parts you are after.
Thanks
#23863
Jonas_Lytken wrote: Tue Jan 23, 2018 5:18 pm Hi Jama

How much would Postage & Shipping be for
0.4.3b kit
and Mega

To Denmark

Also what about discounts if more sets were ordered?
Regards, Jonas
Hello Jonas,

Thanks for the interest.
A kit + a Mega would be £113 shipped
92 + 13 + 8 (tracked international shipping).

If you want to discuss discount on multiple kits send me a message with your requirements and we can work something out.

Thanks
James.

Will this have an updated version about this featu[…]

See my earlier post . The Base Tune sets t[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?