Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of anything related to the Speeduino documentation wiki
By dougo
#14395
Hi,
I thought I might suggest links to documentation that might either be referred, or re-written for the Wiki. In my travels (I guess like most of us) I find gems.
This is an example:
Soldering Page: DIY Surface mount, 'good' & 'Bad' joints, etc.
http://rusefi.com/forum/viewtopic.php?f=4&t=425

I do not suggest copying, but sometimes that might be possible with permission, & reference to the author.

regards, Doug
Problem with fuel pump outlet

Did you mean pin 37! Thats pwm idle. If you int[…]

Dyno mode

Thats how it worked wen i worked with it in the OE[…]

LED's 5,6,7,8 on all the time

You need to calibrate the sensors. Else how with […]

Modified 3 cylinder

You could reassign the pins to unused pins.

Still can't find what you're looking for?