Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of anything related to the Speeduino documentation wiki
By thetoivonen
The information in the Wiki regarding the ECU connector for the Toyota 1MZ-FE is not accurate for all years.

In the '98 Avalon and '99 Camry with 1MZ-FE, both A/T and M/T, and both Cali and Federal, the connector used is a 122 pin, 5 plug TE/AMP part number 5353015.

My guess is the change occurs when OBD2 was implemented, and the part listed in the Wiki may be correct for non OBD2 engines, but cannot confirm personally.
No synchronize

Maybe your VR conditioner has failed on one channe[…]

LED's 5,6,7,8 on all the time

Yeah, grounded Ardu-Stim to pin 10 on the 40 way I[…]

2CV 602 flat twin

Is it the 123 with the MAP feature? What engine ma[…]

PCB for Electromotive Tec3r

What do you think about this BM2LC120FJ-C for re[…]

Still can't find what you're looking for?