Great! Thanks for the feedback. Now I just need to figure-out what I'm doing wrong, as I've tried it with three Megas and one UNO with no luck on different BT modules. The USB-TTL converter module works fine, so it must be something simple I'm missing.berthfield wrote:... I can confirm that holding the Arduino's processor in reset will allow it to function as a USB-TTL converter. ...
You know you're the first person to ever ask the function of that switch
As above a tooth log would be useful. Which condi[…]
You would still need to remove the intake setup of[…]
In my experience the problem only usually occurs[…]
READ THE WIKI. https://wiki.speeduino.com/en/conf[…]