I posted it at Fritz the same time I posted it here, 1 month ago. I don't know how long it takes for a new part to come through FZ, but it hasn't been added yet.
http://forum.fritzing.org/t/174917-dens ... ocket/1279
I couldn't wait for the auto part update so I edited the new PCB svg into the old part inside V0.9.3. I should've changed the part ID so it's easier to add, but didn't know V0.9.3 existed and that they would add it.
The manual hack is ;-
Unpack the new part by changing the extension from .fzpz to .zip, so you can get to the PCB svg - the new svg has black holes -.
Save the internal old part in V0.9.3 as a new part.
Edit the saved part and load in the unpacked PCB svg to the PCB view - Edit Parts/PCB/Load image for view -.
I can remember if I had to reassign the contacts in PCB view edit, so just check they are ok. If you have to reassign, save it half way through incase the program crashes.
If that is too much trouble I can change the ID on the part and send it to you.