Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
User avatar
By FilipW
Selling three front panel boards (rev 3) for speeduino v0.4.
Link to ebay listing.

The board will fit the plastic frame of a hammond 1455 ver2 box.
Dimensions 103x53x1.6mm
Cutout for three DB15 connectors.
14.5mm hole intended for a bulkhead pressure connector.
2 pads with 5.08mm spacing for a screwable terminal block.
Cutout for a panel mount USB-B connector.

Follow the link to my thread to read more about the front panel.
rev3_PCB.jpg (85.64 KiB) Viewed 1364 times

So I had a chance to take another look at my timi[…]

Sync loss on gsxr

I see you did find the DC settings on your scope :[…]

540HP NA 7L V12 3Seater

Thanks for the suggestion, I had not considered th[…]

Decoders - What do you want to see?

Please at least download TS and load the base tune[…]

Still can't find what you're looking for?