Page 1 of 1

sourcing ERZV14D220

PostPosted:Tue Dec 10, 2019 11:11 am
by bugster_de
Hi,

I'm working on my own Speeduino board design at the moment (slow progress a long the lines of spare time unfortunately) and I seem to be unable to source the surge protection Varistor in the 5V Powersupply over here in Germany.

The component in question is ERZV14D220.

Can anyone recommend an alternative / replacement for this which would be easier to source?

Thank you so much

Re: sourcing ERZV14D220

PostPosted:Tue Dec 10, 2019 12:56 pm
by Hasse.69
I would guess this is equivalent and in Germany too.
https://www.ebay.com/itm/4x-SIOV-S14K14 ... SwTiBc4QMH

Let's see what the adults say about it. :mrgreen:

Re: sourcing ERZV14D220

PostPosted:Tue Dec 10, 2019 2:33 pm
by dazq
Does this mouser part not appear on the German site?

https://www.mouser.co.uk/ProductDetail/ ... oswqDhA%3D

Re: sourcing ERZV14D220

PostPosted:Tue Dec 10, 2019 2:34 pm
by pazi88
Any surge varistor with same specs or close enough is same. In mouser/digikey, you can tick the specs of the component and use "show similar" for that.

Re: sourcing ERZV14D220

PostPosted:Tue Dec 10, 2019 2:35 pm
by pazi88
dazq wrote:
Tue Dec 10, 2019 2:33 pm
Does this mouser part not appear on the German site?

https://www.mouser.co.uk/Search/Refine? ... ERZV14D220
Shows 0 stock for me at least. Which has been situation for long.

Re: sourcing ERZV14D220

PostPosted:Tue Dec 10, 2019 2:36 pm
by dazq
Sorry pasted wrong link ,changed to correct one now these show delivery expected 16dec, 960 on order

Re: sourcing ERZV14D220

PostPosted:Tue Dec 17, 2019 7:35 pm
by bugster_de
Hi folks,

thanks for the reply and hints.
The component shows up on mouser.de but they expect minimum order volume. So I will need to collect my complete BOM and then order with them.

Best regards