For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
By ker0
#6724
If anyone is interested, I have about 10 v0.4 boards with no ground plane. You pay shipping, board is free
User avatar
By evolwun
#6931
ker0 wrote:If anyone is interested, I have about 10 v0.4 boards with no ground plane. You pay shipping, board is free
Where are you located? How does the lack of ground plane effect them?
By noisymime
#6932
evolwun wrote:
ker0 wrote:If anyone is interested, I have about 10 v0.4 boards with no ground plane. You pay shipping, board is free
Where are you located? How does the lack of ground plane effect them?
No ground plane means it won't work.

Theoretically this can be repaired by hand, but its laborious and time consuming. I've got a stack of these as well from a dud order but they're really not worth my time fixing (I'm using them as practice boards to teach my son how to solder :lol: )
User avatar
By evolwun
#6934
noisymime wrote:No ground plane means it won't work.)
That is what I thought, but I wanted to make sure. Thanks. If the shipping is in the US (or cheap), I would take a couple to use as mock-up boards. I am going to try to fit them inside a BMW ecu box.
User avatar
By SteveBlakely
#7715
Hi, any more dud boards left noisymime?

I'm after 2 or 3 but also want to order the correct working board too. Is it best to do this via the speeduino store or PM?

Postage will be to New Zealand.

Cheers
Steve.
By noisymime
#7716
SteveBlakely wrote:Hi, any more dud boards left noisymime?

I'm after 2 or 3 but also want to order the correct working board too. Is it best to do this via the speeduino store or PM?

Postage will be to New Zealand.
Yeah no problems. If you put in an order through the Speeduino store, I'll throw in a few of the bad boards.
User avatar
By SteveBlakely
#7731
Just put an order in for a 0.3 board.
Will be much easier than breadboarding and gerber-boarding my prototype's...

Cheers
Steve.
By klotzy_550
#7799
noisymime wrote:
evolwun wrote:
ker0 wrote:If anyone is interested, I have about 10 v0.4 boards with no ground plane. You pay shipping, board is free
(I'm using them as practice boards to teach my son how to solder :lol: )
I didn't realize you had children! Mad props for work, life, and hobby balance!
Problems with noisy tps

there is a software filter setting - under tools-&[…]

Thank you dazq and PSIG, very helpful comments. I[…]

hints & kinks

the speeduino board wasn't going to get me t[…]

Problems loosing sync

Note that some VR conditioner circuits and chips d[…]

Still can't find what you're looking for?