Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
By wygekas
#32064
Sorry for lack of knowledge in electronics but i want to ask if i could swap 160 ohm resistor with 150 or 180? In v0.4 board those are ignitor output R25, R27, R32, R31.

You can run your 2JZ in wasted spark and semi sequ[…]

Hi all, I'm Fred from France This is my first boar[…]

I have a 0.04.4c board, engine was running well (s[…]

Volvo 940 Turbo

Hi All, Thought I'd start a thread on my Volvo pr[…]

Still can't find what you're looking for?