For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
#27191
Enzo wrote: Mon Jul 23, 2018 1:04 am how much for a complete v04.3 kit +the arduino and a bluetooth module shipped to brazil
Is this everthing i will need to have a full operating speeduino with Bluetooth conectivity?
Hi, the 0.4.3 kit + arduino + bt + shipping is £120 (92+13+5+10).
And yes that is everything you'll need for a basic speeduino setup with bluetooth.

Regards,
James.
#29143
Hi,
I'm looking at installing a speeduino ecu into my fiat punto sporting powered classic mini.
It's running a mk1 or 2 punto engine ecu etc.
I would want a pre assembled board with Bluetooth.
Is there anything else you would recommend?
Total price shipped to UK (Essex) please
#29145
SirStanly wrote: Mon Sep 24, 2018 6:37 pm Hi,
I'm looking at installing a speeduino ecu into my fiat punto sporting powered classic mini.
It's running a mk1 or 2 punto engine ecu etc.
I would want a pre assembled board with Bluetooth.
Is there anything else you would recommend?
Total price shipped to UK (Essex) please
Hey.

Small world, I'm in Essex myself.
Do you know of you engine uses a hall or VR crank sensor.
I can build you a custom package to suit exactly what you need.
Probably easier if you use the contact on my website in my signature.

Cheers
James.
#29180
Jama wrote: Mon Sep 24, 2018 8:25 pm
SirStanly wrote: Mon Sep 24, 2018 6:37 pm Hi,
I'm looking at installing a speeduino ecu into my fiat punto sporting powered classic mini.
It's running a mk1 or 2 punto engine ecu etc.
I would want a pre assembled board with Bluetooth.
Is there anything else you would recommend?
Total price shipped to UK (Essex) please
Hey.

Small world, I'm in Essex myself.
Do you know of you engine uses a hall or VR crank sensor.
I can build you a custom package to suit exactly what you need.
Probably easier if you use the contact on my website in my signature.

Cheers
James.
I have sent you a PM and a message on your site, however I never got a message saying it was delivered. So just wanted to make sure you received it.

Thanks
Dan
#29182
SirStanly wrote: Wed Sep 26, 2018 12:54 pm
Jama wrote: Mon Sep 24, 2018 8:25 pm
SirStanly wrote: Mon Sep 24, 2018 6:37 pm Hi,
I'm looking at installing a speeduino ecu into my fiat punto sporting powered classic mini.
It's running a mk1 or 2 punto engine ecu etc.
I would want a pre assembled board with Bluetooth.
Is there anything else you would recommend?
Total price shipped to UK (Essex) please
Hey.

Small world, I'm in Essex myself.
Do you know of you engine uses a hall or VR crank sensor.
I can build you a custom package to suit exactly what you need.
Probably easier if you use the contact on my website in my signature.

Cheers
James.
I have sent you a PM and a message on your site, however I never got a message saying it was delivered. So just wanted to make sure you received it.

Thanks
Dan
Hi Dan.

Yes I have gotten it.
This is just something I do around my day job, I'll get back to you with a proper response this evening.

Regards,
James
#29562
Jama wrote: Thu Dec 21, 2017 3:38 pm Hello all.
I am offering Speeduino kits and related accessories from then UK.
I have been selling on eBay for a while and most people seem to end up joining here afterwards.
So I thought I would offer it all for sale here and pass on fee savings.
I am happy to ship to the UK, Europe and beyond.

If you are Australian based please support Josh by buying from the store: Official Store
If you are US based turboedge is probably your man: His Sales Page

------------------------------------------------------- SPEEDUINO --------------------------------------------------------
I have kits and assembled units using the official Speeduino designs, they are unchanged by me.
£9 per PCB blank v0.4.3b - Black w/white.
£3 per PCB blank VR v3 - Black w/white.
£92 for 0.4.3b kit, includes MPX4250AP MAP sensor and PCB.
£92 for a MX5 PnP Beta kit, including all the components, PCB and 48 Pin connector
£150 for an Assembled 0.4.4 unit. This is an SMD version of the 0.4.3.
I have had a batch of these built professionally in China.
£17 Assembled V3 VR Conditioner. Built by myself, if bought with a kit pcb headers are not
soldered to keep postage costs down.
All components are genuine purchased in the UK from mouser, farnell and RS.
Components are packaged separately and labelled with stickers.
--------------------------------------------------------------------------------------------------------------------------------

--------------------------------------------------------- EXTRAS ---------------------------------------------------------
ULN2003 chips can be added to a 0.4.x kit for £1.
Bluetooth modules with a small pigtail can be added for £5
Stepper Idle drivers can be added for £4
MAP sensors included in the kits can be upgraded to 400kpa (MPX4400) for £10.
MEGA 2560 board with firmware pre-loaded, £13.
The correct sized aluminium enclosure for 0.4.x boards can be included for £26.
A Bosch 221 style ignition driver can be included for £25
A 40 pin dupont housing with 40 crimp terminals can be included for £4, ideal for a 0.4.x board.
------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------ SHIPPING ------------------------------------------------------
Buyer pays post and packing costs
PCBs alone can be sent in an envelope pretty cheaply, but there is no tracking or insurance.
Blank PCBs usually ship same day, kits next day, and assembled units within two days.

Normal UK shipping rates:
PCB only (letter): £1 - First class
Component Kits (Large Letter): £3 - First Class Signed For
Assembled units or large orders (Small Parcel): £8 - Special Next Day delivery

International shipping rates on request.
--------------------------------------------------------------------------------------------------------------------------

--------------------- PAYMENT ---------------------
I am happy to accept the following.
PayPal
UK Bank Transfer
Credit/Debit card (via my website)
BITCOIN (contact me)
--------------------------------------------------------


Hello Jama
Im interested in an assembled speeduino board
Can you get a final price with shipment to Spain (zip code 08303)?

Im building this for a school project, did you recommend something i must put in mind?


Thanks for all.
Regards, Adam
#29563
ManoloElButanero wrote: Sun Oct 14, 2018 4:30 pm
Hello Jama
Im interested in an assembled speeduino board
Can you get a final price with shipment to Spain (zip code 08303)?

Im building this for a school project, did you recommend something i must put in mind?


Thanks for all.
Regards, Adam
Hi Adam.

Sure I'll be happy to help you out
Head over to my website (DIY-EFI.co.uk) and use the contact form on there.
It makes it easier for me to track messages.

I'll work out exactly what you need.
And shipping to Spain is no issue.

Regards
James.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?